The bass: It’s the bedrock of any performance, demanding nothing short of tonal excellence.

Enter ReVolt Bass, a forward-thinking all-analog 3-channel Amp Sim primed to serve as the beating-heart of your rig. The latest-iteration of Two notes’ critically- acclaimed Amp Sim solutions has been engineered with a singular mission: to empower players with the ultimate in foundation tone. Forget any preconceptions of a run-of-the-mill amp-in-a-box, preamp or DI: ReVolt Bass stands-apart. It’s inspired by a trio of iconic tones; It’s fuelled by 200V and genuine tube power; It’s born to assimilate into a myriad of usage scenarios; it gives you edge when you need it, thanks to an integrated Drive Channel Dry/Wet Blend.

Two notes’ getting it: Your Tone Matters. Why settle for anything short of perfection?THE TRIPLE THREAT

Center stage on ReVolt Bass are a trio of tonally-district channels inspired by an Ampeg® SVT ’76, a Marshall® 1992 JMP Super Bass Mark II, plus a custom proprietary high gain Bass amp, specified for the exacting needs of the modern bass player.CHANNEL 1

CLASSIC CLEAN is – put simply – iconic, delivering the thump, full-frequency response and power synonymous with channel 1 on the legendary Ampeg® SVT ’76. A titanic tone guaranteed, oozing with rafter-rattling low end, punchy mids and buttery smooth highs.CHANNEL 2

VINTAGE DIRT is your weapon of choice in moments where you just need to cut above the rest. Taking inspiration from a Marshall® 1992 JMP Super Bass Mark II, this is the epitome of a larger-than-life bass tone topped with lashings of vintage dirt.CHANNEL 3

MODERN DRIVE delivers ultimate flexibility for the forward thinking player. Based on an original Two notes design, it’s super-tight with an abundance of gain for a thick “gained-to-the-max” tone. For added tonal versatility, there’s a switchable Dry/Wet Blend that delivers precision and clarity when you need it.MOJO MAKERIt’s a fact: DI is convenient. It’s reliable. It’s a pure unadulterated tone that’s surgically controlled to the smallest iota. There’s just one snag; It lacks the all-important warmth synonymous with tube amps. ReVolt’s 12AX7 preamp tube running at 200V has been expertly tuned to enrich your tone with undeniable tube mojo. The result is revolutionary. You retain all the convenience of a DI signal, now with the warmth, the bite, the all-important response you demand.DIAL IT IN

The right EQ is paramount when shaping pristine bass tones. That’s why ReVolt Bass is outfitted with a two-band EQ on channel 1, and a shared 3-band EQ on channels 2 and 3. It’s everything you demand from an EQ: musically harmonic in all the right places, and deftly tuned for precision.THE PERFECT BLEND

When you need best-of-both-worlds – the rounded thump of your dry DI signal with the snarl of surgically tuned distortion – ReVolt Bass’ Modern Drive channel is the answer. Dial in your wet/dry blend and enter a world of saturated Analog bliss without sacrificing the pin-point precision you need.DROP THE MIC

ReVolt Bass’s analog cabinet simulation inspired by Ampeg® SVT-810E bass cabinet, gives you one less headache in the quest for reliable sonics. Switch on the cab sim, hookup to a mixer, PA or FRFR cabinet and you’re set for virtually any recording or performance scenario.HOOKUP FLEXIBILITY

ReVolt Bass delivers whatever the setup scenario. First, go direct – it’s simple and sounds phenomenal. For total integration, switch on the 4-Cable mode and add 3 pristine channels to your amp head. Finally, get the most from a Hybrid setup and hook-up ReVolt to your amps FX return!ENGINEERED FOR ANY SCENARIOick-start your journey into the unrestricted world of DynIR virtual cabinets with an exclusive 10-cab pack valued at 100€/$ with any purchase of ReVolt Bass.

Harnessing power equivalent to 160,000 studio-grade IR files, each Two notes DynIR can be shaped to the needs of even the most discerning tone chaser. With 8 mics per cabinet, dual mic-ing and 10K mic positions (front & back), unleashing your tone and finding your signature sound has never been simpler.BROTHERS FROM ANOTHER MOTHERSeeking the ultimate fly rig? Combine ReVolt Bass and the CAB M+ and discover a world of next-generation virtual cabinet emulation fused with sublime analog warmth. Together they offer virtually unlimited tonal possibilities, all packed in a made-to-move, pedalboard friendly format.

Input / Output

Input:

Jack 6.35 mm (1/4”) unbalanced (TS, Tip/Sleeve)

Impedance : 1 MOhms

Send:

Jack 6.35mm(1/4“) unbalanced (TS)

Max output level : +11dBu

Impedance : 300 Ohms

Return:

Jack 6.35mm(1/4“) unbalanced (TS)

Max input level : +11dBu

Impedance : 1 MOhms

Unbuffered, directly connected to Output when active

Output:

Jack 6.35 mm (1/4”) unbalanced (TS)

Max output level : +11 dBu

Impedance : 300 Ohms

DI Output:

XLR, balanced

Impedance : 600 Ohms balanced, 300 Ohms unbalanced

Max output level : +11dBu

Protected against +48V phantom power

MIDI:

MIDI In & Out / Thru

TRS Jack Type-A

Din-5 Pin converter cables included

Phones:

Jack 3.5 mm (1/8“) stereo (TRS, Tip/Ring/Sleeve)

Impedance : 39 Ohms

Aux In:

Jack 3.5 mm (1/8“) stereo (TRS, Tip/Ring/Sleeve)

Impedance : 10 kOhms

Preamp

Tube:

PSVANE ECC83

Power

Mains power adaptor:

DC Jack 2.1mm, negative center

Input voltage:

12V DC

Power consumption:

Approx. 6W

Current draw:

600mA

Dimensions & weight

Width x Depth x Height*:

19.2cm x 11.7cm x 7cm – 7.6″ x 4.6″ x 2.8″

*Including connectors and knobs

Weight:

845 g / 1.86 lbs